Blowing ccci fuse

GNTTYPE Discussion Group: Electrical, Sensors, and Gauges: Blowing ccci fuse
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Scott W. Porterfield (Sixbanger)

Thursday, August 01, 2002 - 08:09 am Click here to edit this post
My car just started blowing the ccci fuse. Sometimes will run for 5 min. sometimes 30 sec. I searched the archives a little and people suggested look at oil pressure switch and crank sensor, didn't find anything unusual. Can anyone tell me all the things this fuse supplies power to , so I can start fishin' .....
Thanks in advance

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Scott W. Porterfield (Sixbanger)

Friday, August 02, 2002 - 12:10 pm Click here to edit this post
Thanks for the tips Hal and John Spina. I swapped out the coil pack from our other GN and started it this morning , ran for quite awhile, didn't have time to drive it, but I'll let you know if that worked
Thanks again,
Scott Porterfield

Top of pagePrevious messageNext messageBottom of pageLink to this message  

frank marshall (Turbofrank)

Saturday, August 03, 2002 - 05:51 pm Click here to edit this post
What was the problem with the fuse.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Scott W. Porterfield (Sixbanger)

Wednesday, August 07, 2002 - 12:15 pm Click here to edit this post
Fuse would just blow after car ran for about 30 seconds or so. I swapped the coil as per John Spina's and Hal's advice and It now seems to be fine , I have driven it maybe 50 miles since then with no problem, hopefully yours is as easy to fix.
Scott


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: