I recently bought an 87 WE4 turbo Regal, that has a scanmaster digital readout system in it. It looks great, but I have'nt the slightest idea of what the codes are, the man I bought the car from knew them by heart and rattled them off without a problem. I am hoping someone has a printout of the codes for this thing so I can glue it to the windshield, and be able to read what this funny little box is telling me. Thanks
mlob@wwsenvironmental.com
On the first screen you will be reading
02-sensor voltage and the amount of timing retard.
AF- IS YOUR MASS AIR FLOW READING
L8- IS THE LOAD VARIABLE
BAT- IS YOUR BATTERY VOLTAGE
INT- IS YOUR INTEGRATOR VALUE
BL- IS YOUR BLOCK LEARN #
MPH- IS YOUR MILES/HOUR
CLT- IS THE COOLANT TEMP. F.
ATS- IS THE AIR TEMP. F.
R- IS YOUR R.P.M.'s
TPS- IS THE THROTTLE POSITION SENSOR VOLTAGE
IAC- IS THE IDLE AIR CONTROL COUNTS
HTH, CURT.
It would be real helpful for us newbee's if someone would also include, where possible, the "normal" range of values for the above parameters.
Conrad Carter
Installing an 87 I/C motor in my 84 Hot Air Car
Take a look here:
http://www.gnttype.org/maint/quickref.html
Ken,
Thanks!
Conrad