Small fuel pressure guage

GNTTYPE Discussion Group: Electrical, Sensors, and Gauges: Small fuel pressure guage
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Nick DePasquale (Nicker)

Wednesday, May 28, 2003 - 06:13 pm Click here to edit this post
Dose anyone know where or have a part number or something of the small guage that screws onto the fuel rail in the engien?

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Steve Sullivan (V6beast)

Wednesday, May 28, 2003 - 06:45 pm Click here to edit this post
I think I used this one and some brass parts from napa.
http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=1597&prmenbr=361

Sully

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Nick DePasquale (Nicker)

Wednesday, May 28, 2003 - 09:17 pm Click here to edit this post
nicee... the 0-60 would work well for us right? thanks again tho

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Robert Smith (Rsmith)

Thursday, May 29, 2003 - 07:42 am Click here to edit this post
If you are only reading static FP (vac hose off, stopped), yes. Stock is 38. If you reading WOT while driving it will top out at arround 22 lbs of boost (increases by one to one ratio). Most TR specific ones go to 100. RamChargers has a couple different ones. One even has an adapter which allows it to work without removing the schrader valve (kind of a pain). And one with a hose (for checking at WOT) so you can get it out where you can see it, but requires you to remove the valve. In a more perfect world they would sell one that had both. I am sure there is a vender that does, but I have not found one yet.

Bob


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: