I just wanted to Thank you guys for the quick response on my fuse panel/electrical problem. I also wanted to apologize for taking so long to reply...unexpected issues. I'm actually working on it at this moment. It seems I have a severely corroded wire that was apparently cut before and just wrapped with electrical tape. I want to replace it and was wondering a few things...What gauge wire are they & Can I bypass the f.links. The wires go like this...2 into 1 (fuseable link at the intersection) and 1 into 1 (inline f.link)ultimately with both cnnecting to an eye for mounting on the starter.
Well Shane, that's OK. Just toss the fuseable link and solder your wires back together the way they were. Be sure to use shrink sleeves and you'll be OK.