Accurate boost level???

GNTTYPE Discussion Group: Scan Tools, Chips, and Tuning: Accurate boost level???
Top of pagePrevious messageNext messageBottom of pageLink to this message  

liberty francis (Limitedt34)

Tuesday, June 04, 2002 - 01:17 pm Click here to edit this post
i just installed a autometer boost/vacume guage and the guage reads 6 psi off of the vacume line and if i tap in to line off of the compressor side of turbo it reads 8-9 psi i know the drop in pressure is from the intercooler but the stock dash guage reads 14 so i dont want to over boost the car????

Top of pagePrevious messageNext messageBottom of pageLink to this message  

liberty francis (Limitedt34)

Tuesday, June 04, 2002 - 01:19 pm Click here to edit this post
also I was told that 14 psi is the stock boost level is this correct?

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Scott Przybysz (Priz)

Tuesday, June 04, 2002 - 08:58 pm Click here to edit this post
I'm not really sure about this, but I've heard that the factory boost gauge isn't accurate, although mine seems fairly close. I'd check it with a scantool, ie TurboLink. I've got my boost gauge hooked into one of the lines coming off of the vacuum block on top of the throttle body.


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: