Intercooler shroud question

GNTTYPE Discussion Group: Induction, Injection, Alcohol, and Exhaust: Intercooler shroud question
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Glenn Drucker (Gdrucker)

Friday, July 12, 2002 - 10:50 am Click here to edit this post
I have an 87 GN. When I look at the bottom of the intercooler shroud, it goes straight down and ends at the sway bar. On the bottom, I see slots on one side and fasteners on the other, leading me to believe that a second piece has broken off. Is there supposed to be another piece that curves forward? I believe that this is the stock shroud but cound be wrong. Is the stock part a one or 2 piece item?

Thanks.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Fred Sweet (Fsweet)

Sunday, July 14, 2002 - 03:35 pm Click here to edit this post
It does sound like you are missing a piece. There is a scop that faces the front of the car between the two baffles (that run from front to back.) It extends down about as far as those baffles and appears to be made of some rubber-like material. It is held on by pop rivets and prone to damage. I have had to repair mine. Does anyone know if this part is still available from GM?

Top of pagePrevious messageNext messageBottom of pageLink to this message  

frank marshall (Turbofrank)

Sunday, July 14, 2002 - 07:58 pm Click here to edit this post
I think you might have to buy the whole shroud

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Phil Aubrey (Paubrey)

Monday, July 15, 2002 - 08:00 am Click here to edit this post
It is sold as one piece. GM # 25526377 duct assembly. I don't know if it's still available from GM. Call any GM dealer and give him the part number.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Shawn (Jsta6)

Monday, July 15, 2002 - 08:43 am Click here to edit this post
you can probably find the used pieces at www.turbobuick.com in the parts for sale forum.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Scott Keller (Keller)

Monday, July 15, 2002 - 03:15 pm Click here to edit this post
...or just go to ours at http://www.gnttype.org/trader/ and avoid the noise.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Fred Sweet (Fsweet)

Tuesday, July 16, 2002 - 04:03 am Click here to edit this post
Checked with Keith Soffa at Arnold Palmer Cadillac - found through the "GM Parts" resource, a great guy who obviously loves our cars - yesterday. The shroud was serviced as one complete piece and is no longer available from GM :( I'd take Scott's advice and try the trader section.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Glenn Drucker (Gdrucker)

Tuesday, July 16, 2002 - 10:16 am Click here to edit this post
Thanks to all for your advise. I found the lower shroud piece at kirbanperformance.com. I would have to reattach it myself. The entire shroud and scoop would be about $150. The search continues... (I may end up going with the Kirban solution)

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Shawn (Jsta6)

Wednesday, July 17, 2002 - 08:27 am Click here to edit this post
Much love and respect for Scott. ;-)

I rarely see this part on this board, but it seems like I see it a lot more often at the other board.

FYI, I just saw one there for $35...

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Glenn Drucker (Gdrucker)

Wednesday, July 17, 2002 - 10:39 am Click here to edit this post
Shawn,
For $35???

I went to www.turbobuick.com, message board, parts for sale and could not find it. Did I miss something?

Glenn

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Shawn (Jsta6)

Wednesday, July 17, 2002 - 11:06 am Click here to edit this post
Woops, almost couldn't find it myself...

you need the scoop, but not the shroud, right?

http://www.turbobuick.com/forums/showthread.php?threadid=36995&referrerid=3922


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: