O2 #'s

GNTTYPE Discussion Group: Induction, Injection, Alcohol, and Exhaust: O2 #'s
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Bill Ritter (18yognnut)

Saturday, August 03, 2002 - 04:58 pm Click here to edit this post
What kind of O2 readings should I be tuning for at WOT? I think my car is running too rich. i am running 45psi of fuel pressure with the vaccume line off. I have a stock turbo running 17psi boost, stock injectors, Red's 93 chip, xp pump, adj. FP reg. i am using a Snap-on scanner to tune with. i looked around on the site to try to find the info. but i didnt see it. if it is there please just point me in the direction.

Thanks,
Bill Ritter, 19

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Michael Ellis (Stickybones)

Saturday, August 03, 2002 - 07:12 pm Click here to edit this post
750 mV is supposed to be ideal. I shoot for 780 to 800 to be on the safe side. If it's over 800 mV, you are probably a bit rich. Under 750 and you're too lean.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Bill Ritter (18yognnut)

Sunday, August 04, 2002 - 02:21 pm Click here to edit this post
Thanks Michael!

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Ken Mosher (Kenmosher)

Monday, August 05, 2002 - 08:17 am Click here to edit this post
http://www.gnttype.org/maint/quickref.html

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Bill Ritter (18yognnut)

Monday, August 05, 2002 - 07:44 pm Click here to edit this post
Thanks Ken! That is the exact kind of info that I was looking for! It is simply amazing how much information is on this site, if you know where to look.
Bill Ritter, 19


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: