TA49 with a .63 Housing?

GNTTYPE Discussion Group: Induction, Injection, Alcohol, and Exhaust: TA49 with a .63 Housing?
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Bill Schultz (Crazybill)

Tuesday, November 19, 2002 - 11:52 am Click here to edit this post
What is the benefit of this combo? Is it still stock appearing and will it fit under the stock cover? I am thinking about buying one of these and need to know if it will work with my setup....Walbro with hotwire, Accufab adj reg, VoltBlaster, Delphi 37lb inj. with Joe Lubrant 93 chip, 9" K/N with solid MAF pipe and Flowmaster 2 1/2 cat back system.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

frank marshall (Turbofrank)

Tuesday, November 19, 2002 - 03:34 pm Click here to edit this post
Yes the turbo is stock appearing and will fit under the cover. your car will run fine with this combo.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Bill Schultz (Crazybill)

Tuesday, November 19, 2002 - 06:30 pm Click here to edit this post
Cool...thanks Frank!

Top of pagePrevious messageNext messageBottom of pageLink to this message  

CHRIS COLELLI (Abadsix)

Wednesday, November 20, 2002 - 05:10 pm Click here to edit this post
My car has this set up and ran a 10.98 121 mph. I have the 55 lb/hr injectors and was running a Red Armstrong 107 chip. You will like this set up, I'm sure.
Chris


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: