my 84 Ttype has not ran in 3years i put a timing chain in it and wouldnt get fire so i put it away 4 a while now i have time and a lil cash to get started so i new computer and coil and ing mod now i have fire but wont start but it gets so close then backfires i am wondering about the the cam driver thing and does it need to be timed and how right now i have the cam sensor off and the window (open spot) is at #1 TDC is this right or does it matter
plz reply
Check the Engine and Mechanicals section of the web site for instructions on how to set the cam sensor.
It's important to set it correctly.
ok ken i cant find that on site and now i looked at my spark on #1 and it just barly has 1 and it backfires i can see spark a lil better but still is very very faint any ideas ps i am new to web site and just want to say this is great thing
heres a link. it has to be at 25* atdc
http://www.gnttype.org/techarea/ecmsensors/camsensor.html
ok messin with car all day no spark i put a test light in the crank sensor wires and when i touch it to the pulse wire with ing. on the plug wires firelike crazy and when i touch the ground i get a light from test light like ground has power i am so lost this is mind boggling hehe but i am still laughin so far
Sounds like a bad crank sensor ...
Wells Crank Sensor (SU133) is $19.00 at Auto Zone ! The Casper (108087) Wirs Harness is $39.00 !Stop fooling around ! Ues the inside Groove !