Electric fan?

GNTTYPE Discussion Group: Hot Air Haven (1984-85): Electric fan?
Top of pagePrevious messageNext messageBottom of pageLink to this message  

chris meyer (Chrizmeyer)

Sunday, September 14, 2003 - 02:45 pm Click here to edit this post
I have an 84 t-tpe and it has no electric fan just a clutch fan and I was wondering if I could remove the clutch fan and install a good electric fan? Would this be pulling enough air? Can I remove the fan shroud also? Any advice would help.
chris

Top of pagePrevious messageNext messageBottom of pageLink to this message  

NICHOLAS C. SCHROMEN (Nick85gn)

Sunday, September 14, 2003 - 04:15 pm Click here to edit this post
674001 RAMCHARGERS DUAL FANS Part number for dual fan setup most guys are running these with no probs......i run these on my car hooked up to a switch......link:
http://ramchargers.com/cgi-bin/ncommerce3/CategoryDisplay?cgrfnbr=25822&cgmenbr=541&cat1=25468&cat2=25821

HTH Nick

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Ron Weier (Ron84ttype)

Monday, September 29, 2003 - 07:57 am Click here to edit this post
I have an 84 T-Type also and have one single fan on it. Doesnt seem to do the job either. Looked at the ramcharger site for the dual fans. Looks nice but width says 26 1/2. How can that fit when the core size for the buick turbo cars is 20 3/4? Will it still fit? I thought it has to fit within the size of the core for adequate cooling effect. Please help with this cause i need some sort of better cooling and that dual setup would be nice if it fits correctly.
Thanks
Ron

Top of pagePrevious messageNext messageBottom of pageLink to this message  

NICHOLAS C. SCHROMEN (Nick85gn)

Monday, September 29, 2003 - 06:27 pm Click here to edit this post
I have the stock radiator size for the hot air and it doesnt fit!! If you have a 86/87 radiator.....which is wider....it will fit without the tabs on the ends..I had to cut it to fit it...dont look the best but looks alright. You cant beat the price!!

HTH agian....LOL.......Nick


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: