Turbo oil feed problem

GNTTYPE Discussion Group: Hot Air Haven (1984-85): Turbo oil feed problem
Top of pagePrevious messageNext messageBottom of pageLink to this message  

mike wahl (Mwbuick)

Saturday, January 03, 2004 - 05:23 pm Click here to edit this post
i just bought a 84 t-type basket case but i like it i pade 700 for it and it came with a bad turbo owner allready pulled it and trashed it so i never seen the prob so i asumed that i was from revin it and turning it off so i put a useable turbo on it and it fried the berings after some looking the turbo oil line was not pumping oil and i have no clue why is it the pump or is there some thing you have to do when instaling a turbo that i might of mised i need help parents are going to have it towed if i dont get it moving soon

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Nick Gianopoulos (Ngianop)

Monday, January 05, 2004 - 05:45 pm Click here to edit this post
If you're sure no oil is coming out of the turbo oil feed line then remove it and make sure it's not plugged.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

mike wahl (Mwbuick)

Wednesday, January 14, 2004 - 08:42 pm Click here to edit this post
i checked the line its got some build up in it but not to the point that it would not flow i blew in to it and can hear gurguling in the oil pan as well


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: