Can anyone tell me the spec's on a q-jet for a early turbo ? CFM, jet sizes, etc. or tell me were to go to find them. Thanks for your help.
I moved this to a more appropriate category. This isn't really an "Engine Mechanicals" question. (i.e. Not about engine internals, etc.)
Hopefully some knowledgeable carbed TR people will chime in. (Fred? Rich?)
Some part numbers can be found at http://www.flash.net/~rjgeorge/carbs.htm but there aren't any specs listed.
Thank you , I thought that is were I had put it but when I came back and looked well... Sorry!!!
Hi
I have the Delco master carb book. It has specs and GM part numbers. A carb number would really help or year of carb. Also Ca. or Fed.
Phil
If someone can give me some OEM Rochester carb. #'s, I have some old books that might show. Let me know.
Chris
I don't have a carb., I would like to use a intake off of a 4.1 on my 3.8 non turbo V6 and I know that a Q-Jet off of a GM V8 is probably to big. I thought maybe I could re-jet and change metering rods and make it work and knowing what was on the turbo may give me a good starting point. Any help would be greatly appreciated. Maybe you know of a better carb. that would work? Thanks
Scott, dont' know if you have this info but here it is anyway.
Turbo Charged Regal Carb numbers
Keep in mind the 1978-79 had a power enrichment piston, which makes it unique.
1978 17058450 Ca. 17058240 Fed. 17058246 Alt.
1979 17059543 Ca. 17059243 Fed.
1980 e-mail me with carb # for specs or part #s
1981 17081243 all
1982 17082244 early 17082260 late
1983 17083242
1984 thank god for fuel injection
If anyone needs numbers for Riv or Le Sabre let me know.
Phil