My 86 GN knocks loudly when first started

GNTTYPE Discussion Group: Engine Mechanicals: My 86 GN knocks loudly when first started
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Jeremy Stone (Paraffin)

Wednesday, April 24, 2002 - 01:20 pm Click here to edit this post
I have a 86 GN and when i first start the engine it knocks from the engine bay and then after awhile i guess after it warms up the knocking stops. Any suggestions to what might be causeing this would be appreciated.

Thanks
Jeremy

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Gary Cooper (6pack)

Saturday, September 07, 2002 - 08:37 pm Click here to edit this post
Don't mean to scare you but it could be piston slap. I just had a piston explode(literally)in a 1991 dodge colt vista and the car did the same thing would knock when cold and quit after it warmed up. The piston is totally gone. Just my 2 cents, I maybe wrong. And I hope I am.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Phil Aubrey (Paubrey)

Saturday, September 07, 2002 - 08:56 pm Click here to edit this post
Is a knock or loud ticking. The cam sensors on some engines will make a loud and heavy ticking when cold.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

brannon lee white (Pushrod)

Tuesday, October 15, 2002 - 07:09 pm Click here to edit this post
When it is in a pull or lag does it knock. Mine does when i first crank it and when i am going up a hill around 1200 rpm. I would also like to know this. It dont matter if it cold or hot

Top of pagePrevious messageNext messageBottom of pageLink to this message  

daniel verdusco (Dverdu)

Wednesday, October 16, 2002 - 12:54 pm Click here to edit this post
Check for the infamous driverside crack in the exhaust manifold between the rear two cyclinders. Remember hearing something about a cracked exhaust making a ticking noiise on start up then going away as it warms up. Hope this helps.


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: