Power loss at top end

GNTTYPE Discussion Group: Engine Mechanicals: Power loss at top end
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Willie E. Berry (Willie)

Wednesday, September 17, 2003 - 07:44 pm Click here to edit this post
Willie here in Phoenix Az. I am having what seems to be a power loss at top end. At the strip, I get good launches but seem to run out of power near the tnd of the track. I noticed on my Turbo Link that the eng looses 800 rpm on the 2/3 shift and does not make it up till the run is over. I have only a few mod. If you have ant ideas I will be in your debt. Thsnks Willie

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Shawn (Jsta6)

Thursday, September 18, 2003 - 03:04 am Click here to edit this post
valve springs
coil pack
ignition module
fuel pump
injectors

what are your mods?

I believe Nick Micale is from Phoenix:
http://www.arizonagn.com/

http://bellsouthpwp.net/s/h/shawnco/gn/mods/mods.htm

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Willie E. Berry (Willie)

Thursday, September 18, 2003 - 09:54 pm Click here to edit this post
Thanks Shawn, Nick is here in Phoenix but I didn't want to bug him he is busy all the time but I will call him. Thanks
36 pound injectors
K/N cold air
T/H down pipe
Air bags Lt/Rt
Pinion Snubber
up graded fuel pump 65 psi at WOT
Ramchargers extender chiop With the LT1 mass air flow sensor
That is all. Thanks


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: