Recently I had disconnected entire harness and laid it to the side to paint the firewall and do some cleaning of loose and frayed wires.When I got to the oil pressure plug at stock location I found that the plug itself was just a glob of melted plastic(nice)..I found the only thing connecting it was the female terminals within the plug itself. I took these terminals off and purchased a new plug and tail from dealer. My problem is the plug and tail they gave me has three wires just like the stocker, but they are all white wires which is a problem because I dont know exactly which wires go where on the positions on the plug. Can someone take a quick look at the colors and positions comin off there stock plug to let me know what goes where???The plug has three positions, 2 wires are side by side and 1 is perpendicular to the two.Thanks.
I sent you an e-mail with attachments from the Buick service manuel. It's pretty straight forward.