87 T With 84 GN tranny
Problem is no switch sensing on the scan tool for 3rd and 4th gear but I'm getting TCC lock feedback. The motor seems to decel rapidy when I lay off the throttle. It also has a 2800 stall in it that was suppose to be lockup. I have installed two govenors and checked the valve body to the best of my capabilities. I have the 87 tranny in the 84 and works fine.
BTW. the reason the 84 is in the 87 and vice versa is I lost a govenor spring in the 84 between rebuilds the 87 was next so... use it.
Any help would be greatly appreciated...
Thanx,
Greg
The valvebody are different were they changed?
That's all i know.
No Frank the valvebody stayed with the tranny... Dropping the pan today to look again and check the solenoid wires... Dunno, somthing to do while watching the race..