GNTTYPE Discussion Group

GNTTYPE Discussion Group: Suspension and Rear Ends: Front sway bar size?

Jeff (Jeffsgn)	Sunday, September 15, 2002 - 10:09 am What is the size of the front Sway bar is it an inch in a 1/4 or a inch in a half?
Jeff (Jeffsgn)	Sunday, September 15, 2002 - 10:11 am sorry this should probably be in suspension. It is a stock 87 Gn sway bar. thanks
Phil Aubrey (Paubrey)	Sunday, September 15, 2002 - 05:01 pm stock standard bar is 22MM The stock GN bar is 32MM
Phil Aubrey (Paubrey)	Sunday, September 15, 2002 - 05:02 pm correction stock standard is 25MM
Donald L. Webb (Spiderwebb)	Sunday, September 15, 2002 - 05:57 pm 32mm equates to 1.260" or 1 1/4" for all intents and purposes. Tip; Divide XXmm by 25.4 to derive inches. 25mm equates to .984" or 1" for all intents and purposes. Wrap typing paper 2 1/2 times around a 25mm bar and it will be 1.000" dia. I'm just using the paper to illustrate how close .984 dia is to 1.000 dia.
Jeff (Jeffsgn)	Sunday, September 15, 2002 - 07:27 pm thanks you very much.
GNTTYPE Moderator Team (Superadmin)	Sunday, September 15, 2002 - 08:48 pm MOVED to suspension topic ...

			This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:
Password: