GN and T-Type Performance Enthusiasts (GNTTYPE) Forums

GN and T-Type Performance Enthusiasts (GNTTYPE) Forums (http://gnttype.org/forums/index.php)
-   Cooling Systems (http://gnttype.org/forums/forumdisplay.php?f=41)
-   -   Radiator Oil cooler fittings (http://gnttype.org/forums/showthread.php?t=13874)

MSKBuick 07-28-2010 07:42 PM

Radiator Oil cooler fittings
 
On the built in oil cooler in the stock radiator, does any one know what type of fitting and size they are?

MSKBuick 07-31-2010 12:46 PM

Re: Radiator Oil cooler fittings
 
Any one know where I can get fittings for this?

MSKBuick 08-01-2010 04:01 PM

Re: Radiator Oil cooler fittings
 
I have determined that is a 3/4" - 18 inverted flare fitting on the radiator, problem is that no one sells a fitting that size.

kenmosher 08-02-2010 04:09 PM

Re: Radiator Oil cooler fittings
 
There are a bunch of specialty fitting suppliers ... are you looking for the male fitting on the hose? Or the female (to fix one bunged up in the radiator?)

Your best bet is a hydraulic hose place ... I had some made several years ago at a local hydraulic (industrial) place and it cost me something like $40.

http://www.valleyhydraulic.com/Brass...ted_Flare.html

MSKBuick 08-04-2010 06:49 PM

Re: Radiator Oil cooler fittings
 
Thanks Ken, I was looking for the male end to make some new lines. I will try the link you included.


All times are GMT -4. The time now is 07:55 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.