GN and T-Type Performance Enthusiasts (GNTTYPE) Forums

GN and T-Type Performance Enthusiasts (GNTTYPE) Forums (http://gnttype.org/forums/index.php)
-   Turbochargers and Intercoolers (http://gnttype.org/forums/forumdisplay.php?f=8)
-   -   vacuum lines for boost solenoid (http://gnttype.org/forums/showthread.php?t=12726)

nixturbosix 05-25-2009 04:50 PM

vacuum lines for boost solenoid
 
On the vacuum line that comes from the boost solenoid it tees off and one goes to the turbo and one goes to the waste gate actuator. and i know one has a orifice inside the vacuum Y so does the orifice side go to the actuator or the turbo itself?

PaCemkr86 05-25-2009 06:01 PM

Re: vacuum lines for boost solenoid
 
http://www.gnttype.org/maint/quickref.html

nixturbosix 05-26-2009 08:35 AM

Re: vacuum lines for boost solenoid
 
thanks phil

bigman 09-18-2010 08:44 AM

Re: vacuum lines for boost solenoid
 
I just got my gn and i'm still trying to learn about the car doing a lot of research . Q; my boost solenoid isnt hooked up their is a 90 degree fitting on the tubing that goes to the wastgate is this correct or should i hook up the solenoid? thanks

PaCemkr86 09-18-2010 10:04 AM

Re: vacuum lines for boost solenoid
 
how much boost is it making? Lets see a pic of your setup

bigman 09-18-2010 10:09 AM

Re: vacuum lines for boost solenoid
 
it shows on the dash a meter that reads 15 or 16 and it goes all the way up. And the 90 degree elbowthe vacum line goes straight to the wastegate .

PaCemkr86 09-18-2010 10:14 AM

Re: vacuum lines for boost solenoid
 
you need an aftermarket boost gauge, the factory one isnt accurate

bigman 09-18-2010 08:35 PM

Re: vacuum lines for boost solenoid
 
how about the line coming from the 90 going to the wastegate is this fine or do I need to hook it back up to the solenoid on the right valve cover?

PaCemkr86 09-18-2010 08:59 PM

Re: vacuum lines for boost solenoid
 
post up a photo of what ya got going on

bigman 09-19-2010 08:21 PM

Re: vacuum lines for boost solenoid
 
ok will get one tomorrow thanks guys


All times are GMT -4. The time now is 10:33 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.