GN and T-Type Performance Enthusiasts (GNTTYPE) Forums

GN and T-Type Performance Enthusiasts (GNTTYPE) Forums (http://gnttype.org/forums/index.php)
-   Suspension/Rear Ends (http://gnttype.org/forums/forumdisplay.php?f=33)
-   -   Latest test pass (http://gnttype.org/forums/showthread.php?t=6997)

PaCemkr86 11-05-2006 03:50 AM

Latest test pass
 
Went to the track on friday night to try out the new "ebay" sway bar and log some pump gas passes with the new MAFTPRO . Which is working awesome.. I love it, very smoooth idle and quick throttle response.
Launch with 10 psi netted a 1.50 60ft

http://www.ccstreetscene.com/multime...stuff/Pace.jpg

http://www.ccstreetscene.com/multime...tuff/Pace2.jpg

** note timming was set @ 17 degress and total boost was 18 psi..

http://www.ccstreetscene.com/multime...Pace%20WFO.mpg

Going 10's on pump gas will be no problem..

only got to make two runs before i got thrown out of the track for no cage..
I was manily there makin 1/8 miles passes and didnt get out of it soon enough and ran 11.20 @ 108MPH in the 1/4


major gain in the way the car launches with the sway bar, and has nice street manners.. thumbs up

NOTACARLO 11-06-2006 04:26 PM

Re: Latest test pass
 
That's flippin awesome Phil.

Looks good and sounds great. How much weight have you cut out of that car?

Dan

PaCemkr86 11-06-2006 05:02 PM

Re: Latest test pass
 
i havent weighed it since i removed the a/c radio and power steering.. but i will be heading back to the track on the 18th and ill weigh it then

PaCemkr86 10-19-2007 10:35 PM

Re: Latest test pass
 
well after a year of street driving, the sway bar is wore out and poppping.. Looks like the bronze bushings wore out.. just a FYI..

gonna look into get a HR bar now

NOTACARLO 10-19-2007 11:31 PM

Re: Latest test pass
 
I just removed mine. I also found that my poly shock bushings have dematerialized. Replaced them with rubber and she is nice and quiet now. Friggin rattles were driving me nuts.


All times are GMT -4. The time now is 03:19 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.