GN and T-Type Performance Enthusiasts (GNTTYPE) Forums

GN and T-Type Performance Enthusiasts (GNTTYPE) Forums (http://gnttype.org/forums/index.php)
-   Engine Electrical/Ignition (http://gnttype.org/forums/forumdisplay.php?f=5)
-   -   87 GN Wiring Diagrams (http://gnttype.org/forums/showthread.php?t=14973)

montvaleplace 03-12-2012 09:39 PM

87 GN Wiring Diagrams
 
Hi guys, I'm new to this site and I have a problem that maybe you can help with. I put a 1987 drivetrain into a 1985 car and cannot get the wiring for the TPS, Crank, and Cam sensors right. We have Mitchell on demand at the shop and in two different places within mitchell it gives me different positions on the plugs for these sensors. I am hoping that someone can show me the factory schematics for it. I looked on this site earlier and the diagram they give looks like mitchells and doesn't show pin positions for the individual wires at the sensors it just shows a box with three wires coming out. Also the 1985 diagram shows a resistor in the wire from the ccci fuse to the ignition module where the 87 does not. Any help is greatly appreciated. If there are other things that I should do for this swap please let me know. Thanks...

turbodave38 03-13-2012 07:04 AM

Re: 87 GN Wiring problems
 
1 Attachment(s)
See if this helps any:

It's the top drawing on page two.

montvaleplace 03-13-2012 08:09 AM

Re: 87 GN Wiring problems
 
Thanks I'll give that a try and will post again afterwards...:drool:

altonsuny 12-03-2012 06:26 AM

Re: 87 GN Wiring Diagrams
 
Nice post. I like it. Thanks for sharing these information. Keep it up. :drive:


All times are GMT -4. The time now is 06:10 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.