With cranking the engine, it sputters, but won't run.
A few days back I had it running very poorly (ran with a sound like pup pup pup...). I fiddled with the wires and connectors on the front of the engine below the coil pack. This made it almost stall.
Today, same crank - sputter - won't run. I felt around the coil pack, and found a harness connector under the coil pack, that has wires that lead up toward the intake manifold. I felt it un-mate while poking around in there.
After plugging it back in, the engine started and ran!
!
Pretty smooth for the engine not running for several years!
I think rodents have been trying to disassemble my wiring harness wire by wire. To make a nest. Or to sell it on ebay.