View Single Post
  #8  
Old 11-21-2008, 02:59 AM
jakeshoe jakeshoe is offline
The Trans Guy
 
Join Date: Aug 2007
Location: Texas
Posts: 25
jakeshoe is on a distinguished road
Default Re: 200-4R Rebuild ... step by step!

The pump can now be gently pryed away from the case and removed.

The splash plate can be slid out exposing the overdrive pressure plate snap ring.

Remove the snap ring, grasp the input shaft and pull out the input shaft, OD carrier assembly, and OD clutches.


Then remove the OD ring gear.
Reply With Quote