View Single Post
  #9  
Old 04-18-2013, 07:24 AM
pajeff87 pajeff87 is offline
Senior Contributor
 
Join Date: Mar 2013
Location: PA
Posts: 213
pajeff87 is on a distinguished road
Default Re: Underhood rehabilitation

Quote:
Originally Posted by Shawn N View Post
Even a new heater valve but at least spend $7 on a new overflow cap lol!

The original heater valve was pretty crusty. Actually, the overflow cap is in real good shape. It just looks bad as my digital camera sometimes does not take the best picture. I ended up replacing the overflow tank though as the original had been epoxied at the hose fitting and was leaking just a bit. The new one was sourced from Highway Stars and I found that the hose is about 2" shorter than stock. It still works, but the hose doesn't have a whole lot of slack in it.


Quote:
Originally Posted by jlat View Post
hello; Real nice job and it must of taken a while. I think you want it to look factory and you did exept for the turbo shield. Just because it came from the factory there might be room for improvement and if it was me I'd get that shield ceramic coated or what ever they call heat removal coating. Powder coating and chrome IMO is not the way to go.
keep up the good work
IBBY

Thanks! I'll keep that in mind.
Reply With Quote