Thread: shifter handle.
View Single Post
  #2  
Old 06-01-2009, 09:28 PM
Keller's Avatar
Keller Keller is offline
GNTTYPE Founder
 
Join Date: Jul 2004
Location: Missouri
Posts: 9,424
Keller is on a distinguished road
Exclamation Re: shifter handle.

You may need to press the handle down further. The clip is not 100% mandatory, but when you have it, it locates the handle properly. It also keeps the handle from coming off.

When the handle is off you can adjust the plunger in the stem of the shaft for length a bit by turning it. It is threaded, and turning it can make it go in and out a bit. I would not advise doing this if it was working OK before.

I would suggest trying to get the correct clip.
__________________
Scott Keller - GNTTYPE Founder & Moderator
Reply With Quote