View Single Post
  #1  
Old 02-27-2010, 02:15 PM
gnray76 gnray76 is offline
 
Join Date: Feb 2010
Location: IL.
Posts: 5
gnray76 is on a distinguished road
Default wiring to/for fuel pump question stumped need help

Hi,
its w/ one of the wires at the rear of tank, 3 pin female connector for fuel pump/sender its tan w/ white tracer- oil sending unit wire? mine has been removed from connector (still in harness coroded) and replaced w/ a wire that runs to positive side of external bosch canister pump, (which Im removing, an putting pump back in tank)... the other wire on positive side runs to the fuel pump relay... looks to be a faded yellow wire?.
Could I tie these two together? an run that way?
wiring diagram I have does NOT show a yellow or a tan, there is a gray wire on diagram that the tan/white wire connects some were in haness.......
thanks, ray

Last edited by gnray76; 02-28-2010 at 01:30 AM. Reason: clean it up
Reply With Quote