Re: Better turbo design
Here is where you get to see the different sizes of the inducer wheels and housings. The inducer on the CHRA is the 86-87, the one on the floor is the 83, and the one in my hand is the 301 inducer. You can see how much bigger the one on the CHRA and the one in my hand are. this is one of the keys to making this work. the second pic is the wheels off. The dirty one is the 86-87, next is the 301, and finally the 83.
Now on to the the inducer housings. As you can see the 86-87 and the TTA housing are about the same size but the 83 is much smaller.
Last edited by charlief1; 12-26-2010 at 12:21 AM.
|