View Single Post
  #6  
Old 08-13-2011, 10:19 PM
smallblock413's Avatar
smallblock413 smallblock413 is offline
Senior Member
 
Join Date: Aug 2011
Location: nc
Posts: 111
smallblock413 is on a distinguished road
Default Re: Boost gauge wont work

Quote:
Originally Posted by kenmosher View Post
If the boost gauge isn't working, first check to see the MAP on the passenger side inner fender is plugged in and the vacuum line to it is connected properly.

If that checks out, then it's pretty common for these instrument panels to develop problems with the traces and/or the driver for the display. Casper's can fix it for you.
BINGO...THANKS....i seen that line was not hooked up but didnot know where to hook it...i hooked it to aline that runs off the throttle body pass side [metal line] that had a kinda stiff plastic line that was not hooked to anything..went inside started it up..BAMMM IM SHOWING BOOOST...THANKS

Last edited by smallblock413; 08-13-2011 at 10:21 PM.
Reply With Quote