This is a general site search and does not include list archives. | |||||||
|
#11
|
|||
|
|||
Re: Turbo rebuild?
I forgot to tell you I have a bigger fuel pump with the wiring upgrade. I run just about what your saying about 16-17 psi, I know I'm on the edge. Someday more octane...
Also Just ordered the ta 49 turbo. Thanks for the help |
#12
|
|||
|
|||
Re: Turbo rebuild?
Just my two cents stock set up street tires and your typical bolt ons I went 14.2.... Added alky with the street chip raised the boost to 22/23 went 12.9 all with awful 60ft times and street tires. Some food for thought....
__________________
blue top injectors, lt1 maf, translator, ATR single shot exhaust, 3inch dp, gnx wheels, turbo tweak chip , atr rear sway bar, super servo, shift kit, stock converter, 210/205 cam at .50 100lb springs, pt 51 turbo street tune for now |
#13
|
||||
|
||||
Re: Turbo rebuild?
I ran 13.6-13.7 my first passes with an old Kenne Bell 9006 chip and nothing else. Still had the stock exhaust, catalytic converter, and tires. And ran 13.3 like that on a cold morning. I ran 12.1 on stock injectors and turbo, 20 PSI, with race gas.
Going 12s is not that hard.
__________________
Scott Keller - GNTTYPE Founder & Moderator
|
#14
|
||||
|
||||
Re: Turbo rebuild?
Any large diesel truck shop usually can balance turbos, and it is not expensive.
__________________
Scott Keller - GNTTYPE Founder & Moderator
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|