This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
Balancer Timing Grooves
Why are there two timing mark grooves in the harmonic balancer on my 87 T? Also the degree indicator tab has a zero mark and there is a visual timing sight tube right next to it. What's the deal? Thanks.
|
#2
|
||||
|
||||
Re: Balancer Timing Grooves
one has been added by some one as a mark for setting the cam sensor.
I did the same to mine when I had the motor out, the first one should be the TDC mark the second should be 25 degrees ATDC
__________________
60lb injectors Gen 2 with Extender Chip Webber 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Stretch Intercooler Alcohol Injection 4 inch MAF pipe with integral sensor 2800 stall lots of fun with a little 6 banger! Best ET 11.43 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|