This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
Factory Tach and boost guage problems
Having a problem with the factory tach and boost guage on my 87 GN.
Tach used to work fine until last night, now will not light up at all anymore. Scanmaster showing RPMs correctly. Is it just the digital lights are burned out or could it be worse than that ? Is it repairable ? Boost guage light up to about 3 lbs of boost then shows dark until about 8 lbs and then lights up again right to the 15 lb mark. Same problem as above ? I will install an aftermarked boost guage next year anyways but would like to know if both of these problems are fixable and what most likely needs to be done. Any advice is appreciated. |
#2
|
|||
|
|||
Re: Factory Tach and boost guage problems
__________________
Currently TR-less, but making progress on the truck! |
#3
|
||||
|
||||
Re: Factory Tach and boost guage problems
__________________
Scott Keller - GNTTYPE Founder & Moderator
|
#4
|
|||
|
|||
Re: Factory Tach and boost guage problems
Thank you for the replies. I found this link after I posted.
I will probably order the Caspers part. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|