This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
Intercooler "screws"
Anybody know what size the "screws" are that hold the scoop on the intercooler? The instructions for the "spring cleaning" calls them screws but they are not slotted for a screw driver and I don't own a nut driver/scocket that will fit. I actually managed to get my intercooler off with the scoop in place. I don't think I want to put it back on with the scoop in place.
Never mind, I took one out with visegrips and took it to AutoZone. It's a 7mm Last edited by Frederickdav; 08-18-2014 at 08:19 PM. |
#2
|
|||
|
|||
Re: Intercooler "screws"
^^ That's it. Glad you got it figured out. Are you washing out the intercooler?
|
#3
|
|||
|
|||
Re: Intercooler "screws"
Yes, I put a whole can of carb cleaner through it per spring cleaning instructions. Now I'm in the process of reinstalling it. It was going pretty good until that one bolt ! It got to the point of frustration so I quit for the day.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|