This is a general site search and does not include list archives. | |||||||
|
#1
|
||||
|
||||
2 powerlogger files.. tell me what ya think
crankin the car up a little for Noble
** note you can download the powerlogger software for free, and read these logged passes and anybody else that has a powerlogger.. |
#2
|
||||
|
||||
Re: 2 powerlogger files.. tell me what ya think
here is the powerlogger software
|
#3
|
|||
|
|||
Re: 2 powerlogger files.. tell me what ya think
12 psi and still set on kill....nice. I think I already have this file.
__________________
Just another not stock regal. P&P heads/intake, 61mm GT, SLIC w/neck, SMC boozamahol, Sewer sized DP, 60#inj, TT 93, Hofer tranny, fuel cell, A1000 pump, stock cam/pistons, 100lb springs, titanium retainers, SS polished TA valves. |
#4
|
||||
|
||||
Re: 2 powerlogger files.. tell me what ya think
make sure you have it set on 3 bar map sensor and LC1 for wideband..
more like 30 psi.. LOL |
#5
|
|||
|
|||
Re: 2 powerlogger files.. tell me what ya think
Is the tranny shifting a little funny Phil? 1st run 1st gear to 2nd is low rpm and bounces on 2nd run? 2nd run is much better with no knock and lower afr... Does the boost come up quick?
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, roller rockers, 3000 conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb |
#6
|
||||
|
||||
Re: 2 powerlogger files.. tell me what ya think
. it looks like that, cause i was easing into the throttle to keep the tires from spinning..
and it is bouncing on the second run cause i pedaling it the throttle |
#7
|
|||
|
|||
Re: 2 powerlogger files.. tell me what ya think
Thanks Phil! Nice tuning on the 2nd run. That thing moves - any idea what it does in the 1/4? Looks like you fixed the park/nuetral switch from the 1st run also.
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, roller rockers, 3000 conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb |
#8
|
||||
|
||||
Re: 2 powerlogger files.. tell me what ya think
ill be heading to the Noble event in OK, to see what it runs..
good eye on the park neutral switch Il Kim |
Bookmarks |
|
|