This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
No fuel pressure, new pump.
I have a weird problem with my ignition because of the way that wires were ran to the gauges. Ever since I started messing around with the wiring under the dash, now theres no fuel pressure. Does anyone have any ideas?
Thanks. |
#2
|
|||
|
|||
Re: No fuel pressure, new pump.
Is the pump powering up when you turn the ignition key to on?
1. Make sure the orange ecm wire at the battery is plugged in. 2. Check the fp fuse. 3. If you have a hotwire make sure it is connected properly and check inline fuse on power wire. 4. Make sure oil pressure plug is plugged in at sensor. 5. Check relay on passenger side fender.
__________________
2008 rebuild, Comp roller cam, Cat stroker, RJC gridle, CPT66BB, PTE Stock Location, Champion iron, 60# Mototron, ported throttlebody, RJC Power Plate, Jimmy-built trans w/Precision Vigilante converter, ATR SS dual exhaust, Razor alky. Last edited by chrisgarrett; 11-10-2007 at 10:01 AM. |
#3
|
|||
|
|||
Re: No fuel pressure, new pump.
Nope, its not even priming. Is there anything under the dash that I may have accidentally messed with?
|
#4
|
||||
|
||||
Re: No fuel pressure, new pump.
does it have an aftermarket alarm??
|
#5
|
|||
|
|||
Re: No fuel pressure, new pump.
That I know of, no it doesn't No noise anyways, or lights flashing.
For what its worth... I did take the battery out to charge it? |
#6
|
|||
|
|||
Re: No fuel pressure, new pump.
Did you plug in the ecm wire? The orange wire attached to the positive cable at the battery.
__________________
2008 rebuild, Comp roller cam, Cat stroker, RJC gridle, CPT66BB, PTE Stock Location, Champion iron, 60# Mototron, ported throttlebody, RJC Power Plate, Jimmy-built trans w/Precision Vigilante converter, ATR SS dual exhaust, Razor alky. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|