This is a general site search and does not include list archives. | |||||||
|
#1
|
||||
|
||||
Body day 1
Here is what I found after taking most of it apart.
First pic is the door I knew I was replacing it was split and pretty much rotted out. Next is the DS roof at the top. Ttop base is going to need some work, then my trunk. Everything else looks pretty sound rockers are good. http://photoshare.shaw.ca/messages/v...arm/page/1/15/
__________________
60lb injectors Gen 2 with Extender Chip Webber 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Stretch Intercooler Alcohol Injection 4 inch MAF pipe with integral sensor 2800 stall lots of fun with a little 6 banger! Best ET 11.43 |
#2
|
||||
|
||||
Re: Body day 1
Larrym, Still looks like a lot of work... Any new pics on your progress??? Tom G.
__________________
www.tomsttype.com Grand National Diagnostic Manuals |
#3
|
||||
|
||||
progress
Well its been fun so far, welders flash when welding hurts like a bastard.
Got the drip rail in the trunk fixed, the rest looked pretty good. Got my first coat of primer on my new door hung, fixed the dent in the hood that was a PITA to get the body line to my liking. Going to fog on a guide coat, sand and see how straight it is. Then its time to seal it and top coat the top was not as bad as I thought by the time I had it cleaned up all I had to do was por 15 and fill the 1 hole in the center, the worst was the black centre section picked one up off evilbay for $ 50.00 including freight . http://photoshare.shaw.ca/messages/v...iew/page/1/15/ http://photoshare.shaw.ca/messages/v...arm/page/1/15/
__________________
60lb injectors Gen 2 with Extender Chip Webber 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Stretch Intercooler Alcohol Injection 4 inch MAF pipe with integral sensor 2800 stall lots of fun with a little 6 banger! Best ET 11.43 |
#4
|
||||
|
||||
Re: Body day 1
Larrym, LOOKING GOOD... Tom G.
__________________
www.tomsttype.com Grand National Diagnostic Manuals |
#5
|
||||
|
||||
Re: Body day 1
Well its sprayed took 2 trys I had some questionable guidance from my paint tech he told me 8-1-1 marked it right on the can(laid out really heavy with solvent pop on the flat areas).
Nasons says 8-1-2 second go around thats what I did used 1/2 the paint laid way flatter and only had a couple of small runs no pop or sags http://photoshare.shaw.ca/messages/v...arm/page/1/15/
__________________
60lb injectors Gen 2 with Extender Chip Webber 212/206 roller cam Turbonetics BB CPT 61 CAS V4 Stretch Intercooler Alcohol Injection 4 inch MAF pipe with integral sensor 2800 stall lots of fun with a little 6 banger! Best ET 11.43 |
#6
|
||||
|
||||
Re: Body day 1
NICE JOB!!! Tom G.
__________________
www.tomsttype.com Grand National Diagnostic Manuals |
#7
|
||||
|
||||
Re: Body day 1
Very cool write up!
__________________
Ken Mosher 1987 GN original owner 650+ HP Black 2015 BMW 328xi XDrive wagon 2012 Volkswagen Tiguan (the Tig!) Night Blue Met (sold) 2006 Trailblazer SS Red Jewel Tint 395 HP AWD (sold) 2014 Silverado LTZ Crew 4WD 2012 Honda VFR 1200F Tahitian Blue (sold) 2015 BMW S1000R Racing Red 2013 Honda CBR500R Red (wife's bike) 2014 Triumph Bonneville T100 2003 Harley Davidson V Rod Anniversary Edition |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|