This is a general site search and does not include list archives. | |||||||
|
|
#1
|
||||
|
||||
anyone have a pic of a 85 DP??
I'm just looking to make my own Downpipe from summit exhaust bends, anyone have a pic i can go by?? i have an idea more or less from looking at mine. I just needed a pic to help out, when i'm done making it, should painted with hi temp paint????
__________________
Big mouth cold air intake, Hooker exhaust kit, dynomax supercat, over 30, Edelbrock shocks and new springs. |
#2
|
|||
|
|||
Re: anyone have a pic of a 85 DP??
I send you an e-mail with a pic of my 85.
Scott; I can't seem to load any jpegs??
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, roller rockers, 3000 conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb |
#3
|
||||
|
||||
Re: anyone have a pic of a 85 DP??
im also having a problems uploading pics in my attachments
|
#4
|
|||
|
|||
Re: anyone have a pic of a 85 DP??
Well T-Type85David? What up?
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, roller rockers, 3000 conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb |
#5
|
||||
|
||||
Re: anyone have a pic of a 85 DP??
THanks for sending the pic, big help, looks like it's gonna be harder then i thought. This will help spool up right??? a bigger and smoother DP?? I think i'm just gonna upgrade my internals on the turbo and heat coat it or turbo wrap it.
Nothing much IL KIM , i see you went to a 86 setup, how much, how long did it take??
__________________
Big mouth cold air intake, Hooker exhaust kit, dynomax supercat, over 30, Edelbrock shocks and new springs. Last edited by T-Type85David; 07-06-2007 at 01:27 AM. |
#6
|
|||
|
|||
Re: anyone have a pic of a 85 DP??
Thanks for the update. I converted back in 1990. Got a barely used motor form a salvage yard down south and took it down to the bearings and rebuilt. Could still see the honing marks on the engine. Put about 10k into it back then and time was errelavant when I was young and single... Of course there was no info on what worked and what didn't back then...
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, roller rockers, 3000 conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|