This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
Correct settings inside a MAF Translator?
I had a maft installed a month ago and i just want to be sure the translator settings are correct.
bank 1-2 are up and bank 3-4 are down. and base and wot settings are at 0 The maft has a 6.25 version update and the cover is black with the power 6 logo. I see current maft with maf translator in pink letters,thats not the one i have Any thoughts would be appreciated Im using a 3.5 maf if that matters
__________________
Stock 1987 G/N. Goal is to make it a Reliable Daily Driver and to run Consistent 12.50 or Better Et's |
#2
|
||||
|
||||
Re: Correct settings inside a MAF Translator?
Are you running the extender chip with those settings?
__________________
87 GN PTE TA49, adj.fpr. 2 1/2" Pypes ex. 3" ATR downpipe 3" hI- flow cat, Race pro muffs. 60/65lb.mototron injectors, LT1 valve springs, heads pocket ported, 3 angle valve job, 3" LT1 maf/translator, 340 walbro/ hot wired. 93 TT chip,9"K&N. |
#3
|
||||
|
||||
Re: Correct settings inside a MAF Translator?
there will be a setting in the translator for the 3.5 maf..
|
#4
|
|||
|
|||
Re: Correct settings inside a MAF Translator?
Yes the dip switches are on on off off
Is that not correct?
__________________
Stock 1987 G/N. Goal is to make it a Reliable Daily Driver and to run Consistent 12.50 or Better Et's |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|