GN and T-Type Performance Enthusiasts (GNTTYPE) Forums GN and T-Type Performance Enthusiasts (GNTTYPE) Forums
This is a general site search and does not include list archives.

Go Back   GN and T-Type Performance Enthusiasts (GNTTYPE) Forums > Add-on Electronics and Electrical > Scan Tools

Reply
 
Thread Tools Display Modes
  #1  
Old 02-19-2008, 01:31 PM
dfirefighter's Avatar
dfirefighter dfirefighter is offline
Member
 
Join Date: Sep 2006
Location: Ohio
Posts: 85
dfirefighter is on a distinguished road
Default Re: Scanmaster hook up

Is there anyway to upgrade scanmaster 2.0 to 2.1?
__________________
red armstrong volt booster and 93 chip, adj. fuel press. reg., walbro pump/hotwire., T. Hust. down pipe, 9" K&N, underdrive pulley, art car shift kit/trans pan, trans. cooler.
Reply With Quote
  #2  
Old 02-19-2008, 10:21 PM
PaCemkr86's Avatar
PaCemkr86 PaCemkr86 is offline
Tech Support
 
Join Date: Jan 2005
Location: Texas
Posts: 4,817
PaCemkr86 is on a distinguished road
Send a message via AIM to PaCemkr86
Default Re: Scanmaster hook up

there is a chip you can change on the inside.. pretty easy to do it..
__________________
Phil Underwood

My Turbo Buick

Last edited by PaCemkr86; 02-20-2008 at 10:10 AM.
Reply With Quote
  #3  
Old 02-19-2008, 11:16 PM
dfirefighter's Avatar
dfirefighter dfirefighter is offline
Member
 
Join Date: Sep 2006
Location: Ohio
Posts: 85
dfirefighter is on a distinguished road
Default Re: Scanmaster hook up

Quote:
Originally Posted by PaCemkr86
there is a chip you can change on the side.. pretty easy to do it..
where can the chip be purchased at and for how much?
__________________
red armstrong volt booster and 93 chip, adj. fuel press. reg., walbro pump/hotwire., T. Hust. down pipe, 9" K&N, underdrive pulley, art car shift kit/trans pan, trans. cooler.
Reply With Quote
  #4  
Old 02-20-2008, 10:10 AM
PaCemkr86's Avatar
PaCemkr86 PaCemkr86 is offline
Tech Support
 
Join Date: Jan 2005
Location: Texas
Posts: 4,817
PaCemkr86 is on a distinguished road
Send a message via AIM to PaCemkr86
Default Re: Scanmaster hook up

i think its like 15 dollars or so..
__________________
Phil Underwood

My Turbo Buick
Reply With Quote
  #5  
Old 02-20-2008, 12:18 PM
turbojd's Avatar
turbojd turbojd is offline
Senior Member
 
Join Date: Feb 2005
Location: Monmouth County, N.J.
Posts: 185
turbojd is on a distinguished road
Default Re: Scanmaster hook up

You might wanna try www.fullthrottlespeed.com thats where I got my chip to update my translator, talk to Mike.
__________________
87 GN PTE TA49, adj.fpr. 2 1/2" Pypes ex. 3" ATR downpipe 3" hI- flow cat, Race pro muffs. 60/65lb.mototron injectors, LT1 valve springs, heads pocket ported, 3 angle valve job, 3" LT1 maf/translator, 340 walbro/ hot wired. 93 TT chip,9"K&N.
Reply With Quote
  #6  
Old 02-21-2008, 12:03 AM
dfirefighter's Avatar
dfirefighter dfirefighter is offline
Member
 
Join Date: Sep 2006
Location: Ohio
Posts: 85
dfirefighter is on a distinguished road
Default Re: Scanmaster hook up

Quote:
Originally Posted by dfirefighter
Is there anyway to upgrade scanmaster 2.0 to 2.1?
anyway to go from 2.0 to 2.2?
__________________
red armstrong volt booster and 93 chip, adj. fuel press. reg., walbro pump/hotwire., T. Hust. down pipe, 9" K&N, underdrive pulley, art car shift kit/trans pan, trans. cooler.
Reply With Quote
  #7  
Old 02-28-2008, 02:28 PM
turbodave38's Avatar
turbodave38 turbodave38 is offline
Retired
 
Join Date: Jun 2005
Location: TN
Posts: 107
turbodave38 is on a distinguished road
Send a message via MSN to turbodave38
Default Re: Scanmaster hook up

2.2 is an upgrade chip that you'd get along with Powerlogger, so that the Scanmaster can directly interface with Powerlogger.
2.1 is the latest if you're NOT going to hook up to Powerlogger.
__________________
TurboDave EWCS(SW) USN Ret
H&N Turbo Racing
Sevierville, TN
SD2 Speed Density fuel, spark and boost management
Reply With Quote
  #8  
Old 02-28-2008, 10:16 PM
dfirefighter's Avatar
dfirefighter dfirefighter is offline
Member
 
Join Date: Sep 2006
Location: Ohio
Posts: 85
dfirefighter is on a distinguished road
Default Re: Scanmaster hook up

Quote:
Originally Posted by turbodave38
2.2 is an upgrade chip that you'd get along with Powerlogger, so that the Scanmaster can directly interface with Powerlogger.
2.1 is the latest if you're NOT going to hook up to Powerlogger.
well I have a 2.0 scanmaster, and fullthrottle sent me a 2.2 chip upgrade. so do i put the 2.2 chip in my 2.0 scanmaster?
__________________
red armstrong volt booster and 93 chip, adj. fuel press. reg., walbro pump/hotwire., T. Hust. down pipe, 9" K&N, underdrive pulley, art car shift kit/trans pan, trans. cooler.
Reply With Quote
  #9  
Old 02-29-2008, 09:49 AM
turbodave38's Avatar
turbodave38 turbodave38 is offline
Retired
 
Join Date: Jun 2005
Location: TN
Posts: 107
turbodave38 is on a distinguished road
Send a message via MSN to turbodave38
Default Re: Scanmaster upgrades

There shouldn't be any problem using it.
__________________
TurboDave EWCS(SW) USN Ret
H&N Turbo Racing
Sevierville, TN
SD2 Speed Density fuel, spark and boost management
Reply With Quote
  #10  
Old 03-03-2008, 01:53 PM
dfirefighter's Avatar
dfirefighter dfirefighter is offline
Member
 
Join Date: Sep 2006
Location: Ohio
Posts: 85
dfirefighter is on a distinguished road
Default Re: Scanmaster hook up

Quote:
Originally Posted by turbojd
You might wanna try www.fullthrottlespeed.com thats where I got my chip to update my translator, talk to Mike.
fullthrottle does not offer the update chip from 2.0 to 2.1.

anyone know where i can get this update at?

also i am unable to use the 2.0 with powerlogger. and the 2.0 will not work with the 2.2 chip for powerlogger.
__________________
red armstrong volt booster and 93 chip, adj. fuel press. reg., walbro pump/hotwire., T. Hust. down pipe, 9" K&N, underdrive pulley, art car shift kit/trans pan, trans. cooler.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:31 PM.


This page maintained by: gnttype-webmaster@gnttype.org

The content, images, text and multimedia displayed and contributed by the members of the Grand National and T-Type Performance Enthusiasts Organization are Copyright ©1996-2005. No part, section, image, article or whole of this site may be reposted or redisplayed without permission of the author/contributor and/or the Grand National and T-Type Performance Enthusiasts Organization.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.