- Remove the door panel (upper and lower).
- There are two bolts in the middle of the door that connect to the center of the scissor mechanism that move the window up and down. Try moving these up and down until you get the window to line up correctly. It will take you a few trys to get it right. Sometimes it will be to far forward, sometimes it will be too far back, etc.
- On the top of the door are the bolts for the felt pads that help the window stay pressed outward. Try moving those out.
- There are two stoppers that will need to be adjusted. They keep the window from going up to far. There is one at each end of the door, one in the front, one in the back, kind of in the middle. You will also need to adjust them up or down and in and out.
|