Help! need specs, running rich.

GNTTYPE Discussion Group: Scan Tools, Chips, and Tuning: Help! need specs, running rich.
Top of pagePrevious messageNext messageBottom of pageLink to this message  

Lorraine Senetza (Lorsen)

Tuesday, January 14, 2003 - 08:12 pm Click here to edit this post
My mechanic says my 87 GN is running too rich. I have the original chip and a street performance chip. Apparently, the original chip doesn't work as it should and we aren't sure if the performance one does either. I want to use my performance chip and I need the specifications for it, so he can make the comparisons.
Unfortunately I have next to nothing in the way of information other than it is a Pit-bull street performance chip, circa 1990. ANY help would be greatly appreciated. Company name, specs, anything that i won't find on the chip itself.

Thank you,

Lorsen

Top of pagePrevious messageNext messageBottom of pageLink to this message  

CURT ENGLEHARDT (Turbo2)

Wednesday, January 15, 2003 - 07:36 am Click here to edit this post
A few questions:Do you have an adjustable Fuel Regulator or is it stock?
Any upgrades(bigger injectors,fuel pump,bigger turbo,etc.) or is it stock setup?

Also it's hard to believe you have 2 different chips and they are both bad(unless you keep changing them without diconnecting power to the computer,or not taking the proper steps to protect them from static)It's not impossible,just unlikely.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Joseph Cheung (Jcheung)

Wednesday, January 15, 2003 - 09:00 am Click here to edit this post
The Pit Bull chip is sold by Applied Technologies & Research, located in Fair Play SC. You can contact them by phone: 864-972-3800.

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Jim McGrady (Sixshooter)

Wednesday, January 15, 2003 - 11:09 am Click here to edit this post
Lorsen, you are a step ahead of me....LOL....
I am not a mechanic and now have a 1987 GN.
I found where the computer is on the passenger side kick panel.
When changing chips, do I just pull the old one out (93 chip) and put in the 108 chip?
I have located the adjusting rod for changing the boost. I am thinking that turning the rod in (shorter) increases boost?
Where can I buy the "stuff" for increasing octane in the gas to 108 or higher?
This car has had many upgrades with time slips in the mid 12's. It runs very well now and I don't want to start changing anything until I know more about it.
Any help will be appreciated.
Jim

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Jim McGrady (Sixshooter)

Wednesday, January 15, 2003 - 11:11 am Click here to edit this post
Can someone please tell me how to post a new message on this site? I went to a previously posted question to ask what I wanted on the last one but that is not really the right way to do it.
Jim/sixshooter

Top of pagePrevious messageNext messageBottom of pageLink to this message  

Ken Mosher (Kenmosher)

Wednesday, January 15, 2003 - 01:50 pm Click here to edit this post
First, the chip is just as simple as you said. Take the inspection cover off, pull the old one and put the new one in it's place.

Second, you can increase octane quite a bit (but not to 108) by using xylene or similar stuff. It's easier to just buy racing gasoline though.

Third, take a look at:

http://www.gnttype.org/techarea/recipes/recipepage.html for modifications guidelines

http://www.gnttype.org/techarea/fuelsystem/fuelpage.html for fuel related topics (in the middle are a couple on how to mix your own octane booster)

http://www.gnttype.org/techarea/turbo/turbopage.html shows how the wastegate rod works (Make your own adjustable wastegate

As far as posting a new message ... go to the subtopic you want (like Chips/Scan tools or Buick Experience) and scroll all the way to the bottom of the page.

There's a "Create a New Conversation" button there.


Add a Message


This is a private posting area. A valid username and password combination is required to post messages to this discussion.
Username:  
Password: