This is a general site search and does not include list archives. | |||||||
|
#1
|
|||
|
|||
switched to booster
i switched my brakes to vacume. and am having trouble.
where can i plug the line from the booster to get vacume for my breakes? keep in mind i bought a new vacume block but they only have them for 86 and up and it is to big for the trottol body i have the 85 t-type 3.8 Last edited by redgsxr05; 07-27-2010 at 09:28 PM. Reason: added info |
#2
|
||||
|
||||
Re: switched to booster
They do make one for the 84/85 cars. But it doesn't have a port for the brakes. http://www.casperselectronics.com/st...oducts_id=1431
Perhaps T into the evap canister line? See the vacuum diagram attached to the link above. You will have to use a check valve, as any normally aspirated setup would.
__________________
Scott Keller - GNTTYPE Founder & Moderator
|
#3
|
|||
|
|||
Re: switched to booster
I hate asking, where can i find evap canister?
|
#4
|
||||
|
||||
Re: switched to booster
On the 86/87 cars it is on the front drivers corner of the engine compartment.
__________________
Scott Keller - GNTTYPE Founder & Moderator
|
Bookmarks |
Tags |
brakes |
|
|